The correct way to use an electric foot grinder

1. Be sure to keep your feet dry before grinding them. If there is water on your feet, you can use a towel to dry them before proceeding.
2. Install the scrub head, turn on the switch, and adjust the gear according to your own foot skin.
3. Use the scrub head to polish the feet with calluses and thick cuticles for 1-2 seconds (the polishing time at the same position should not exceed 3-4 seconds), gently stick to the skin, do not press hard, and slowly slide over the feet you want to polish. of the skin surface of the feet.
4. After polishing, check whether the softness you want has been achieved. If not, you can repeat polishing at the same position for 1-2 seconds and check again until you get the softness and smoothness you want to achieve.
5. After polishing, turn off the instrument and rinse away the removed dead skin. You can also use a wet towel to wipe off excess dead skin and dandruff, and dry it thoroughly. You can apply some foot cream appropriately to moisturize your feet. Better results.
6. After completion, remove the scrub head and rinse it with clean water.